SPLASHBACK ROLLS FOR KITCHEN AND BATH

The alternative to Glass Clear back panels

Could it be any easier? With our self-adhesive materials for roll back walls, you offer your customers as a digital printer a foolproof way to give kitchens and bathrooms a fresh look. Measure, cut, stick – done!
Much less expensive and easier to transport than traditional wood materials or glass backsplashes.
Take advantage of this opportunity to capitalize on the growing Interior Design and Home Decoration market.

Play Video


Watch the product film now!

Benefits at a glance

•  simple production
•  high stiffness
•  easy assembly without scraping and milling
•  sticks to tiles, plaster, concrete, plasterboard
•  unproblematic shipping
•  easy to clean

2 layers composition

This composite is suitable for mounting on flat, smooth surfaces.
This is how easy it is to produce this roll back wall in just three steps:

1. printing: you print on the Blockout 360 LUVESS SM W adh print material with latex, eco-solvent or solvent inks.
2. laminating: You laminate the Protect 250 glass clear laminate onto the front of the print material using a laminating machine.
3. finishing: Finally, you assemble the composite to the final format – that’s it!

our advice:
Laminate this composite onto an alu-dibond panel to create a beautiful glass-look image: it looks deceptively similar to a real glass image, but is also much more practical and cost-effective.

Suitable Surfaces
  • glass
  • plasterboard
  • alu-dibond
  • MDF board
  • other smooth surfaces

In general, the surface to be used should be free of dust, dirt, grease and oils

3 layers composition

The distinguishing feature of this composite is additional stiffening by a self-adhesive foam layer. The 3-layer composite is also suitable for application on slightly uneven substrates such as tiles or painted walls; slight unevenness is bridged and is hardly or not at all visible.
This is how simple the processing works in four steps:

1. printing: You print the print material
Blockout 360 LUVESS SM W with latex, eco-solvent or solvent inks.
2. laminating: You laminate the Protect 250 glass clear laminate onto the front of the print material using a laminating machine.
3. laminating: In addition, laminate the double-sided self-adhesive foam adhesive Power Foam Tape to the back of the print material.
4. confection: Finally, you assemble the composite to the final format – that’s it!

our advice:
With this composite, you can offer a great alternative to traditional glass backsplashes for the kitchen, or give your customer’s shower a new look as a shower backsplash.

Suitable Surfaces
  • all substrates of the 2-layer composite
  • tiles
  • woodchip (if painted with dispersion paint)
  • OSB board
  • mineral plaster/masonry

Contact us

You would like to get to know us personally or have questions? Send us a message or contact us by phone.
We are looking forward to talking to you!

Lets get in touch